Driveways and paths · Hampshire

Tarmac driveway resurfacing in Winchester

For tarmac resurfacing jobs in Winchester, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

WINCHESTER GUIDE£28–£50 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

Tarmac resurfacing prices in Winchester

For Winchester, we apply the South East rate, about 10% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£28–£50 per m²
Example: 30 m² drive£910–£1,650
Example: 50 m² drive£1,400–£2,500
Example: 80 m² drive£2,200–£3,950

As a 2026 guide in Winchester, tarmac resurfacing work runs at about £28–£50 per m² including VAT, so a 80 m² drive is roughly £2,200–£3,950. Guide only; the survey confirms a fixed price.

How it is built

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Winchester: the local details

What applies in Winchester. We reach Winchester on our Hampshire survey days; Southampton is 12 miles away.

Postcodes
SO23, SO21, SO22
Area
Hampshire
Nearest towns
Bishopstoke (7 miles), Eastleigh (7 miles), Romsey (9 miles), Hedge End (11 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Close to Winchester: Bishopstoke, Eastleigh, Romsey, Hedge End, Southampton.

What is included in tarmac resurfacing?

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Cut out and patch failed areas before overlaying
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old

Rules that apply in Winchester

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Winchester: common questions

Do I need permission for tarmac resurfacing in Winchester?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Winchester property?

Often 1–2 days for a typical drive. We book Winchester surveys alongside other jobs in Hampshire, and give you dates once the specification is agreed.

Which Winchester postcodes do you cover?

We cover Winchester including SO23, SO21, SO22, and nearby Bishopstoke, Eastleigh, Romsey.

Will someone visit before I get a fixed price in Winchester?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Winchester

Tell us what you have in mind for Winchester and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in Winchester: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price