Driveways and paths · Hampshire

New tarmac driveways in Winchester

If you are weighing up new tarmac driveways in Winchester, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

WINCHESTER GUIDE£66–£105 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Winchester?

For Winchester, we apply the South East rate, about 10% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£66–£105 per m²
Example: 30 m² drive£2,200–£3,450
Example: 50 m² drive£3,300–£5,250
Example: 80 m² drive£5,300–£8,350

As a 2026 guide in Winchester, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Guide only; the survey confirms a fixed price.

Do I need permission in Winchester?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Covering Winchester

Survey cover and pricing for Winchester. Winchester sits 12 miles from Southampton, within our regular Hampshire cover.

Postcodes
SO23, SO21, SO22
Area
Hampshire
Nearest towns
Bishopstoke (7 miles), Eastleigh (7 miles), Romsey (9 miles), Hedge End (11 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Bishopstoke, Eastleigh, Romsey, Hedge End, Southampton.

Your questions answered

How quickly can work start in Winchester?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Winchester surveys alongside other jobs in Hampshire, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Winchester?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Winchester?

As a 2026 guide in Winchester, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Winchester?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Winchester

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Winchester.

Free survey for new surfacing

New tarmac driveways in Winchester: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price