Driveways and paths · Hampshire

Tar and chip driveways in Winchester

We survey and price tar and chip driveways across Winchester and the SO23, SO21, SO22 postcodes, with every layer and its depth written into the quote.

WINCHESTER GUIDE£50–£82 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Winchester

Guide prices below are for Winchester, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£50–£82 per m²
Example: 50 m² drive£2,500–£4,100
Example: 100 m² drive£4,950–£8,250
Example: 200 m² drive£9,400–£15,700

As a 2026 guide in Winchester, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 100 m² drive is roughly £4,950–£8,250. Guide only; the survey confirms a fixed price.

Where we work in and around Winchester

Survey cover and pricing for Winchester. Winchester sits 12 miles from Southampton, within our regular Hampshire cover.

Postcodes
SO23, SO21, SO22
Area
Hampshire
Nearest towns
Bishopstoke (7 miles), Eastleigh (7 miles), Romsey (9 miles), Hedge End (11 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Bishopstoke, Eastleigh, Romsey, Hedge End, Southampton.

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Second coat where a double dressing is specified

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Planning and kerb rules for Winchester

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Winchester: common questions

Is the survey in Winchester free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a tar and chip driveway cost in Winchester?

As a 2026 guide in Winchester, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 100 m² drive is roughly £4,950–£8,250. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a tar and chip driveway take in Winchester?

Often 1–3 days depending on base work. We book Winchester surveys alongside other jobs in Hampshire, and give you dates once the specification is agreed.

Do you cover all of Winchester?

We cover Winchester including SO23, SO21, SO22, and nearby Bishopstoke, Eastleigh, Romsey.

Also in Winchester

Tell us what you have in mind for Winchester and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tar and chip driveways in Winchester: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price