Driveways and paths · Hampshire

Tar and chip driveways in Romsey

Every tar and chip driveway we price in Romsey comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

ROMSEY GUIDE£50–£82 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Romsey?

Local guide rates for Romsey (the South East, about 10% above our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£50–£82 per m²
Example: 50 m² drive£2,500–£4,100
Example: 100 m² drive£4,950–£8,250
Example: 200 m² drive£9,400–£15,700

As a 2026 guide in Romsey, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 200 m² drive is roughly £9,400–£15,700. Guide only; the survey confirms a fixed price.

Romsey: the local details

What applies in Romsey. We cover Romsey by grouping surveys with nearby Hampshire jobs; Southampton is 7 miles away.

Postcodes
SO51, SO52
Area
Hampshire
Nearest towns
Totton (5 miles), Eastleigh (7 miles), Southampton (7 miles), Bishopstoke (8 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Totton, Eastleigh, Southampton, Bishopstoke, Winchester.

Planning and kerb rules for Romsey

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Questions about tar and chip driveways in Romsey

How long does a tar and chip driveway take in Romsey?

Often 1–3 days depending on base work. We book Romsey surveys alongside other jobs in Hampshire, and give you dates once the specification is agreed.

What is the price of a tar and chip driveway in Romsey?

As a 2026 guide in Romsey, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 200 m² drive is roughly £9,400–£15,700. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Romsey?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Romsey?

We cover Romsey including SO51, SO52, and nearby Totton, Eastleigh, Southampton.

Other work in Romsey

Questions about tar and chip driveways in Romsey? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tar and chip driveways in Romsey: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price