Tar and chip driveways in Hucknall
Planning a tar and chip driveway in Hucknall? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

Tar and chip driveway prices in Hucknall
For Hucknall, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £44–£74 per m² |
| Example: 50 m² drive | £2,200–£3,700 |
| Example: 100 m² drive | £4,400–£7,350 |
| Example: 200 m² drive | £8,400–£13,950 |
As a 2026 guide in Hucknall, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Guide only; the survey confirms a fixed price.
Covering Hucknall
What applies in Hucknall. Hucknall is covered on our Nottinghamshire rounds, 6 miles from Nottingham.
- Postcodes
- NG15, NG6
- Area
- Nottinghamshire
- Nearest towns
- Arnold (4 miles), Eastwood (5 miles), Kirkby-in-Ashfield (5 miles), Nottingham (6 miles)
- Pricing
- East Midlands, about 2% below our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Arnold, Eastwood, Kirkby-in-Ashfield, Nottingham, Ilkeston.
What is included in a tar and chip driveway?
Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.
- Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Chippings spread straight onto the binder
- Second coat where a double dressing is specified
How it is built
Rules that apply in Hucknall
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Hucknall: common questions
Can I get a free survey in Hucknall?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What is the price of a tar and chip driveway in Hucknall?
As a 2026 guide in Hucknall, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Edging, drainage and a dropped kerb are priced separately where needed.
What approvals apply in Hucknall?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How long will the work take at my Hucknall property?
Often 1–3 days depending on base work. We book Hucknall surveys alongside other jobs in Nottinghamshire, and give you dates once the specification is agreed.
More we do in Hucknall
- Permeable tarmac driveways
- Tarmac driveway repairs
- Front garden to tarmac driveway
- Car park surfacing
- New tarmac driveways
- Car park resurfacing
- Everything in Hucknall
Questions about tar and chip driveways in Hucknall? Call, WhatsApp or use the form, and we'll talk it through.
Tar and chip driveways in Hucknall: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED