Driveways and paths · Lancashire

Tar and chip driveways in Morecambe

Tar and chip driveways in Morecambe start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

MORECAMBE GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Morecambe?

These Morecambe guide prices reflect rates in the North West, about 3% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Morecambe, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Guide only; the survey confirms a fixed price.

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Planning and kerb rules for Morecambe

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Morecambe: the local details

The key facts for Morecambe. We reach Morecambe on our Lancashire survey days; Preston is 22 miles away.

Postcodes
LA4, LA5
Area
Lancashire
Nearest towns
Heysham (2 miles), Lancaster (3 miles), Fleetwood (12 miles), Thornton-Cleveleys (15 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Close to Morecambe: Heysham, Lancaster, Fleetwood, Thornton-Cleveleys, Cleveleys.

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tar and chip driveways in Morecambe

Can I get a free survey in Morecambe?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a tar and chip driveway take in Morecambe?

Often 1–3 days depending on base work. We book Morecambe surveys alongside other jobs in Lancashire, and give you dates once the specification is agreed.

Tar and chip driveway cost in Morecambe: what should I budget?

As a 2026 guide in Morecambe, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Edging, drainage and a dropped kerb are priced separately where needed.

Which Morecambe postcodes do you cover?

We cover Morecambe including LA4, LA5, and nearby Heysham, Lancaster, Fleetwood.

More we do in Morecambe

Ready for a price in Morecambe? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Morecambe: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price