Permeable tarmac driveways in Morecambe
Permeable tarmac driveways in Morecambe start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

How much should I budget in Morecambe?
For Morecambe, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Porous asphalt drive on a permeable stone base | £78–£121 per m² |
| Example: 30 m² drive | £2,550–£4,000 |
| Example: 50 m² drive | £3,900–£6,050 |
| Example: 80 m² drive | £6,200–£9,700 |
As a 2026 guide in Morecambe, permeable tarmac driveway work runs at about £78–£121 per m² including VAT, so a 80 m² drive is roughly £6,200–£9,700. Guide only; the survey confirms a fixed price.
What we do on a permeable tarmac driveway
A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.
- Ground check: how fast does the soil drain?
- Geotextile separating layer on the formation
- Open-graded permeable sub-base, often Type 3 or 4/20 stone
- Porous asphalt binder and surface courses
- Edge restraint that does not block the flow
How it is built
Planning and kerb rules for Morecambe
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
Where we work in and around Morecambe
What applies in Morecambe. We reach Morecambe on our Lancashire survey days; Preston is 22 miles away.
- Postcodes
- LA4, LA5
- Area
- Lancashire
- Nearest towns
- Heysham (2 miles), Lancaster (3 miles), Fleetwood (12 miles), Thornton-Cleveleys (15 miles)
- Pricing
- North West, about 3% below our UK midpoint
- Kerb approvals
- The highway authority
Close to Morecambe: Heysham, Lancaster, Fleetwood, Thornton-Cleveleys, Cleveleys.
Morecambe: common questions
What is the price of a permeable tarmac driveway in Morecambe?
As a 2026 guide in Morecambe, permeable tarmac driveway work runs at about £78–£121 per m² including VAT, so a 80 m² drive is roughly £6,200–£9,700. Edging, drainage and a dropped kerb are priced separately where needed.
Do I need permission for a permeable tarmac driveway in Morecambe?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How long does a permeable tarmac driveway take in Morecambe?
Usually 3–5 working days. We book Morecambe surveys alongside other jobs in Lancashire, and give you dates once the specification is agreed.
Do you cover all of Morecambe?
We cover Morecambe including LA4, LA5, and nearby Heysham, Lancaster, Fleetwood.
More we do in Morecambe
- Front garden to tarmac driveway
- Private and access road surfacing
- Tarmac driveway repairs
- Car park surfacing
- Tarmac driveway resurfacing
- Tarmac paths and footpaths
- Everything in Morecambe
Ready for a price in Morecambe? Use the guide price tool or send the form, and we'll arrange a visit.
Permeable tarmac driveways in Morecambe: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED