Tar and chip driveways in Stalybridge

Tar and chip driveway prices in Stalybridge

These Stalybridge guide prices reflect rates in the North West, about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£73 per m²
Example: 50 m² drive	£2,200–£3,650
Example: 100 m² drive	£4,350–£7,300
Example: 200 m² drive	£8,300–£13,800

As a 2026 guide in Stalybridge, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Stalybridge

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Stalybridge: the local details

Survey cover and pricing for Stalybridge. We cover Stalybridge by grouping surveys with nearby Greater Manchester jobs; Manchester is 7 miles away.

Postcodes: SK15, OL5
Area: Greater Manchester
Nearest towns: Dukinfield (1 mile), Ashton-under-Lyne (2 miles), Hyde (2 miles), Denton (3 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Close to Stalybridge: Dukinfield, Ashton-under-Lyne, Hyde, Denton, Droylsden.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Stalybridge: common questions

What is the price of a tar and chip driveway in Stalybridge?

As a 2026 guide in Stalybridge, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Stalybridge?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Stalybridge?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Stalybridge?

Often 1–3 days depending on base work. We book Stalybridge surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Other work in Stalybridge

Ready for a price in Stalybridge? Use the guide price tool or send the form, and we'll arrange a visit.