Tar and chip driveways in Hyde

Tar and chip driveway prices in Hyde

Guide prices below are for Hyde, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£73 per m²
Example: 50 m² drive	£2,200–£3,650
Example: 100 m² drive	£4,350–£7,300
Example: 200 m² drive	£8,300–£13,800

As a 2026 guide in Hyde, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Guide only; the survey confirms a fixed price.

Covering Hyde

Survey cover and pricing for Hyde. We reach Hyde on our Greater Manchester survey days; Manchester is 7 miles away.

Postcodes: SK14
Area: Greater Manchester
Nearest towns: Denton (2 miles), Dukinfield (2 miles), Stalybridge (2 miles), Ashton-under-Lyne (3 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Denton, Dukinfield, Stalybridge, Ashton-under-Lyne, Bredbury.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Loose surplus chippings swept up after a few days

How it is built

Do I need permission in Hyde?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Your questions answered

Do I need permission for a tar and chip driveway in Hyde?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Tar and chip driveway cost in Hyde: what should I budget?

As a 2026 guide in Hyde, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Edging, drainage and a dropped kerb are priced separately where needed.

Which Hyde postcodes do you cover?

We cover Hyde including SK14, and nearby Denton, Dukinfield, Stalybridge.

How long will the work take at my Hyde property?

Often 1–3 days depending on base work. We book Hyde surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Also in Hyde

Questions about tar and chip driveways in Hyde? Call, WhatsApp or use the form, and we'll talk it through.