Driveways and paths · County Durham

Tar and chip driveways in Consett

A good tar and chip driveway in Consett looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

CONSETT GUIDE£42–£70 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Consett

For Consett, we apply the North East rate, about 7% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£42–£70 per m²
Example: 50 m² drive£2,100–£3,500
Example: 100 m² drive£4,200–£7,000
Example: 200 m² drive£7,950–£13,250

As a 2026 guide in Consett, tar and chip driveway work runs at about £42–£70 per m² including VAT, so a 50 m² drive is roughly £2,100–£3,500. Guide only; the survey confirms a fixed price.

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Consett: the local details

Survey cover and pricing for Consett. We cover Consett by grouping surveys with nearby County Durham jobs; Darlington is 25 miles away.

Postcodes
DH8
Area
County Durham
Nearest towns
Stanley (5 miles), Prudhoe (7 miles), Whickham (9 miles), Blaydon-on-Tyne (9 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Stanley, Prudhoe, Whickham, Blaydon-on-Tyne, Newburn.

What we do on a tar and chip driveway

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in

Planning and kerb rules for Consett

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Your questions answered

Do I need permission for a tar and chip driveway in Consett?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Consett?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a tar and chip driveway in Consett?

As a 2026 guide in Consett, tar and chip driveway work runs at about £42–£70 per m² including VAT, so a 50 m² drive is roughly £2,100–£3,500. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a tar and chip driveway take in Consett?

Often 1–3 days depending on base work. We book Consett surveys alongside other jobs in County Durham, and give you dates once the specification is agreed.

Other work in Consett

Questions about tar and chip driveways in Consett? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tar and chip driveways in Consett: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price