Driveways and paths · County Durham

Tarmac driveway resurfacing in Consett

We survey and price tarmac resurfacing jobs across Consett and the DH8 postcodes, with every layer and its depth written into the quote.

CONSETT GUIDE£23–£42 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in Consett?

For Consett, we apply the North East rate, about 7% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£23–£42 per m²
Example: 30 m² drive£770–£1,400
Example: 50 m² drive£1,150–£2,100
Example: 80 m² drive£1,850–£3,350

As a 2026 guide in Consett, tarmac resurfacing work runs at about £23–£42 per m² including VAT, so a 50 m² drive is roughly £1,150–£2,100. Guide only; the survey confirms a fixed price.

Where we work in and around Consett

Consett at a glance. Consett is covered on our County Durham rounds, 25 miles from Darlington.

Postcodes
DH8
Area
County Durham
Nearest towns
Stanley (5 miles), Prudhoe (7 miles), Whickham (9 miles), Blaydon-on-Tyne (9 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Stanley, Prudhoe, Whickham, Blaydon-on-Tyne, Newburn.

What we do on tarmac resurfacing

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

Planning and kerb rules for Consett

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Your questions answered

What is the price of tarmac resurfacing in Consett?

As a 2026 guide in Consett, tarmac resurfacing work runs at about £23–£42 per m² including VAT, so a 50 m² drive is roughly £1,150–£2,100. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Consett free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Consett?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you cover all of Consett?

We cover Consett including DH8, and nearby Stanley, Prudhoe, Whickham.

More we do in Consett

Tell us what you have in mind for Consett and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac driveway resurfacing in Consett: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price