Driveways and paths · Tyne and Wear

Tar and chip driveways in Newburn

Planning a tar and chip driveway in Newburn? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

NEWBURN GUIDE£42–£70 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

How much should I budget in Newburn?

These Newburn guide prices reflect rates in the North East, about 7% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£42–£70 per m²
Example: 50 m² drive£2,100–£3,500
Example: 100 m² drive£4,200–£7,000
Example: 200 m² drive£7,950–£13,250

As a 2026 guide in Newburn, tar and chip driveway work runs at about £42–£70 per m² including VAT, so a 200 m² drive is roughly £7,950–£13,250. Guide only; the survey confirms a fixed price.

Where we work in and around Newburn

What applies in Newburn. Newburn is 5 miles from Newcastle upon Tyne, and we survey there as part of Tyne and Wear cover.

Postcodes
NE15, NE40, NE5, NE20
Area
Tyne and Wear
Nearest towns
Blaydon-on-Tyne (2 miles), Whickham (4 miles), Prudhoe (5 miles), Gosforth (5 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

Close to Newburn: Blaydon-on-Tyne, Whickham, Prudhoe, Gosforth, Newcastle upon Tyne.

Rules that apply in Newburn

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Chippings spread straight onto the binder
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

Newburn: common questions

How long will the work take at my Newburn property?

Often 1–3 days depending on base work. We book Newburn surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.

How much does a tar and chip driveway cost in Newburn?

As a 2026 guide in Newburn, tar and chip driveway work runs at about £42–£70 per m² including VAT, so a 200 m² drive is roughly £7,950–£13,250. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Newburn?

We cover Newburn including NE15, NE40, NE5, NE20, and nearby Blaydon-on-Tyne, Whickham, Prudhoe.

Are there planning or highway rules in Newburn?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Newburn

Ready for a price in Newburn? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Newburn: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price