Driveways and paths · Cheshire

Tar and chip driveways in Winsford

For tar and chip driveways in Winsford, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

WINSFORD GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

How much should I budget in Winsford?

Guide prices below are for Winsford, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Winsford, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Guide only; the survey confirms a fixed price.

Where we work in and around Winsford

Survey cover and pricing for Winsford. Winsford sits 14 miles from Warrington, within our regular Cheshire cover.

Postcodes
CW7, CW10
Area
Cheshire
Nearest towns
Northwich (5 miles), Crewe (7 miles), Sandbach (7 miles), Nantwich (8 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Northwich, Crewe, Sandbach, Nantwich, Congleton.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days

Layer by layer

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Do I need permission in Winsford?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about tar and chip driveways in Winsford

Can I get a free survey in Winsford?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Tar and chip driveway cost in Winsford: what should I budget?

As a 2026 guide in Winsford, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Winsford property?

Often 1–3 days depending on base work. We book Winsford surveys alongside other jobs in Cheshire, and give you dates once the specification is agreed.

Which Winsford postcodes do you cover?

We cover Winsford including CW7, CW10, and nearby Northwich, Crewe, Sandbach.

Other work in Winsford

Tell us what you have in mind for Winsford and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tar and chip driveways in Winsford: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price