Tar and chip driveways in Crewe

Tar and chip driveway prices in Crewe

Guide prices below are for Crewe, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£73 per m²
Example: 50 m² drive	£2,200–£3,650
Example: 100 m² drive	£4,350–£7,300
Example: 200 m² drive	£8,300–£13,800

As a 2026 guide in Crewe, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Guide only; the survey confirms a fixed price.

What we do on a tar and chip driveway

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in
Loose surplus chippings swept up after a few days

How it is built

Do I need permission in Crewe?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Covering Crewe

What applies in Crewe. As one of the larger towns in Cheshire, Crewe sees regular survey visits.

Postcodes: CW1, CW2
Area: Cheshire
Nearest towns: Nantwich (4 miles), Sandbach (5 miles), Winsford (7 miles), Kidsgrove (8 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Nantwich, Sandbach, Winsford, Kidsgrove, Congleton.

Your questions answered

Tar and chip driveway cost in Crewe: what should I budget?

As a 2026 guide in Crewe, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Crewe?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Crewe?

We cover Crewe including CW1, CW2, and nearby Nantwich, Sandbach, Winsford.

How long will the work take at my Crewe property?

Often 1–3 days depending on base work. We book Crewe surveys alongside other jobs in Cheshire, and give you dates once the specification is agreed.

Also in Crewe

Ready for a price in Crewe? Use the guide price tool or send the form, and we'll arrange a visit.