Driveways and paths · Cheshire

Tar and chip driveways in Nantwich

Planning a tar and chip driveway in Nantwich? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

NANTWICH GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Nantwich?

Local guide rates for Nantwich (the North West, about 3% below our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Nantwich, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 50 m² drive is roughly £2,200–£3,650. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Nantwich

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Nantwich

What applies in Nantwich. Nantwich is covered on our Cheshire rounds, 23 miles from Warrington.

Postcodes
CW5
Area
Cheshire
Nearest towns
Crewe (4 miles), Sandbach (8 miles), Winsford (8 miles), Kidsgrove (12 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Crewe, Sandbach, Winsford, Kidsgrove, Northwich.

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in
  • Loose surplus chippings swept up after a few days

Questions about tar and chip driveways in Nantwich

Do I need permission for a tar and chip driveway in Nantwich?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Nantwich?

We cover Nantwich including CW5, and nearby Crewe, Sandbach, Winsford.

Is the survey in Nantwich free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a tar and chip driveway take in Nantwich?

Often 1–3 days depending on base work. We book Nantwich surveys alongside other jobs in Cheshire, and give you dates once the specification is agreed.

More we do in Nantwich

Ready for a price in Nantwich? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Nantwich: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price