Tar and chip driveways in Gerrards Cross

How much should I budget in Gerrards Cross?

Guide prices below are for Gerrards Cross, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£50–£82 per m²
Example: 50 m² drive	£2,500–£4,100
Example: 100 m² drive	£4,950–£8,250
Example: 200 m² drive	£9,400–£15,700

As a 2026 guide in Gerrards Cross, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 200 m² drive is roughly £9,400–£15,700. Guide only; the survey confirms a fixed price.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Covering Gerrards Cross

Gerrards Cross at a glance. Gerrards Cross is covered on our Buckinghamshire rounds, 33 miles from Milton Keynes.

Postcodes: SL9
Area: Buckinghamshire
Nearest towns: Chalfont St Peter (2 miles), Uxbridge (4 miles), Rickmansworth (5 miles), Slough (6 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Chalfont St Peter, Uxbridge, Rickmansworth, Slough, Ruislip.

Rules that apply in Gerrards Cross

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

How it is built

Questions about tar and chip driveways in Gerrards Cross

Tar and chip driveway cost in Gerrards Cross: what should I budget?

As a 2026 guide in Gerrards Cross, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 200 m² drive is roughly £9,400–£15,700. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a tar and chip driveway take in Gerrards Cross?

Often 1–3 days depending on base work. We book Gerrards Cross surveys alongside other jobs in Buckinghamshire, and give you dates once the specification is agreed.

Are there planning or highway rules in Gerrards Cross?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Gerrards Cross free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Gerrards Cross

Questions about tar and chip driveways in Gerrards Cross? Call, WhatsApp or use the form, and we'll talk it through.