Driveways and paths · Buckinghamshire

Tarmac paths and footpaths in Gerrards Cross

A good tarmac path in Gerrards Cross looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

GERRARDS CROSS GUIDE£61–£99 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much should I budget in Gerrards Cross?

For Gerrards Cross, we apply the South East rate, about 10% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£61–£99 per m²
Example: 10 m² path£730–£1,200
Example: 20 m² path£1,350–£2,200
Example: 40 m² path£2,400–£3,950

As a 2026 guide in Gerrards Cross, tarmac path work runs at about £61–£99 per m² including VAT, so a 40 m² path is roughly £2,400–£3,950. Guide only; the survey confirms a fixed price.

Covering Gerrards Cross

Gerrards Cross at a glance. Smaller towns such as Gerrards Cross are surveyed alongside nearby jobs in Buckinghamshire.

Postcodes
SL9
Area
Buckinghamshire
Nearest towns
Chalfont St Peter (2 miles), Uxbridge (4 miles), Rickmansworth (5 miles), Slough (6 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Close to Gerrards Cross: Chalfont St Peter, Uxbridge, Rickmansworth, Slough, Ruislip.

Rules that apply in Gerrards Cross

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Gentle cross-fall so water runs off to the border

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tarmac paths in Gerrards Cross

What approvals apply in Gerrards Cross?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a tarmac path cost in Gerrards Cross?

As a 2026 guide in Gerrards Cross, tarmac path work runs at about £61–£99 per m² including VAT, so a 40 m² path is roughly £2,400–£3,950. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Gerrards Cross?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Gerrards Cross?

Often 1–2 days. We book Gerrards Cross surveys alongside other jobs in Buckinghamshire, and give you dates once the specification is agreed.

More we do in Gerrards Cross

Ready for a price in Gerrards Cross? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Gerrards Cross: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price