Tar and chip driveways in Rickmansworth
Homeowners in Rickmansworth ask us about tar and chip driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

How much should I budget in Rickmansworth?
Guide prices below are for Rickmansworth, adjusted for the East of England, where surfacing rates run about 5% above our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £47–£79 per m² |
| Example: 50 m² drive | £2,350–£3,950 |
| Example: 100 m² drive | £4,700–£7,900 |
| Example: 200 m² drive | £9,000–£14,950 |
As a 2026 guide in Rickmansworth, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 100 m² drive is roughly £4,700–£7,900. Guide only; the survey confirms a fixed price.
Rules that apply in Rickmansworth
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Rickmansworth: the local details
The key facts for Rickmansworth. Rickmansworth is covered on our Hertfordshire rounds, 4 miles from Watford.
- Postcodes
- WD3
- Area
- Hertfordshire
- Nearest towns
- Watford (4 miles), Chalfont St Peter (4 miles), Gerrards Cross (5 miles), Bushey (5 miles)
- Pricing
- East of England, about 5% above our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Watford, Chalfont St Peter, Gerrards Cross, Bushey, Ruislip.
What is included in a tar and chip driveway?
Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Chippings spread straight onto the binder
- Loose surplus chippings swept up after a few days
- Second coat where a double dressing is specified
Questions about tar and chip driveways in Rickmansworth
How much does a tar and chip driveway cost in Rickmansworth?
As a 2026 guide in Rickmansworth, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 100 m² drive is roughly £4,700–£7,900. Edging, drainage and a dropped kerb are priced separately where needed.
Do you cover all of Rickmansworth?
We cover Rickmansworth including WD3, and nearby Watford, Chalfont St Peter, Gerrards Cross.
Is the survey in Rickmansworth free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What approvals apply in Rickmansworth?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Other work in Rickmansworth
- Tarmac driveway repairs
- Car park and yard repairs
- Car park surfacing
- Tarmac driveway resurfacing
- Front garden to tarmac driveway
- Car park resurfacing
- Everything in Rickmansworth
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Rickmansworth.
Tar and chip driveways in Rickmansworth: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED