Red tarmac driveways in Banbury

What does a red tarmac driveway cost in Banbury?

Local guide rates for Banbury (the South East, about 10% above our UK midpoint):

Item	Guide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base	£82–£127 per m²
Example: 30 m² drive	£2,700–£4,150
Example: 50 m² drive	£4,100–£6,350
Example: 80 m² drive	£6,600–£10,100

As a 2026 guide in Banbury, red tarmac driveway work runs at about £82–£127 per m² including VAT, so a 80 m² drive is roughly £6,600–£10,100. Guide only; the survey confirms a fixed price.

Do I need permission in Banbury?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a red tarmac driveway

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

Full dig-out and MOT Type 1 sub-base, about 150 mm
Black AC 20 binder course, about 50–60 mm
Red pigmented surface course, about 20–30 mm
Colour sample discussed before ordering
Falls and drainage set as for any new drive

Covering Banbury

Survey cover and pricing for Banbury. Banbury sits 22 miles from Oxford, within our regular Oxfordshire cover.

Postcodes: OX16, OX17, OX15
Area: Oxfordshire
Nearest towns: Bicester (14 miles), Witney (20 miles), Oxford (22 miles), Carterton (24 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Bicester, Witney, Oxford, Carterton.

How it is built

Banbury: common questions

Do I need permission for a red tarmac driveway in Banbury?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Banbury?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Red tarmac driveway cost in Banbury: what should I budget?

As a 2026 guide in Banbury, red tarmac driveway work runs at about £82–£127 per m² including VAT, so a 80 m² drive is roughly £6,600–£10,100. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Banbury?

We cover Banbury including OX16, OX17, OX15, and nearby Bicester, Witney, Oxford.

More we do in Banbury

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Banbury.