New tarmac driveways in Banbury

New tarmac driveway prices in Banbury

These Banbury guide prices reflect rates in the South East, about 10% above our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£66–£105 per m²
Example: 30 m² drive	£2,200–£3,450
Example: 50 m² drive	£3,300–£5,250
Example: 80 m² drive	£5,300–£8,350

As a 2026 guide in Banbury, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Guide only; the survey confirms a fixed price.

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

How it is built

Do I need permission in Banbury?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Banbury: the local details

Banbury at a glance. Banbury is 22 miles from Oxford, and we survey there as part of Oxfordshire cover.

Postcodes: OX16, OX17, OX15
Area: Oxfordshire
Nearest towns: Bicester (14 miles), Witney (20 miles), Oxford (22 miles), Carterton (24 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

Close to Banbury: Bicester, Witney, Oxford, Carterton.

Banbury: common questions

Will someone visit before I get a fixed price in Banbury?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

New tarmac driveway cost in Banbury: what should I budget?

As a 2026 guide in Banbury, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a new tarmac driveway in Banbury?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Banbury postcodes do you cover?

We cover Banbury including OX16, OX17, OX15, and nearby Bicester, Witney, Oxford.

Other work in Banbury

Ready for a price in Banbury? Use the guide price tool or send the form, and we'll arrange a visit.