New tarmac driveways in Witney

How much should I budget in Witney?

For Witney, we apply the South East rate, about 10% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£66–£105 per m²
Example: 30 m² drive	£2,200–£3,450
Example: 50 m² drive	£3,300–£5,250
Example: 80 m² drive	£5,300–£8,350

As a 2026 guide in Witney, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 80 m² drive is roughly £5,300–£8,350. Guide only; the survey confirms a fixed price.

Covering Witney

Witney at a glance. Witney is covered on our Oxfordshire rounds, 10 miles from Oxford.

Postcodes: OX28, OX29
Area: Oxfordshire
Nearest towns: Carterton (5 miles), Oxford (10 miles), Abingdon (12 miles), Didcot (16 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Carterton, Oxford, Abingdon, Didcot, Bicester.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Rules that apply in Witney

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Questions about new tarmac driveways in Witney

What is the price of a new tarmac driveway in Witney?

As a 2026 guide in Witney, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 80 m² drive is roughly £5,300–£8,350. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Witney?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Witney postcodes do you cover?

We cover Witney including OX28, OX29, and nearby Carterton, Oxford, Abingdon.

How long does a new tarmac driveway take in Witney?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Witney surveys alongside other jobs in Oxfordshire, and give you dates once the specification is agreed.

More we do in Witney

Tell us what you have in mind for Witney and we'll book a survey and put the specification in writing.