Driveways and paths · Oxfordshire

Tarmac paths and footpaths in Witney

Planning a tarmac path in Witney? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

WITNEY GUIDE£61–£99 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much should I budget in Witney?

Local guide rates for Witney (the South East, about 10% above our UK midpoint):

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£61–£99 per m²
Example: 10 m² path£730–£1,200
Example: 20 m² path£1,350–£2,200
Example: 40 m² path£2,400–£3,950

As a 2026 guide in Witney, tarmac path work runs at about £61–£99 per m² including VAT, so a 10 m² path is roughly £730–£1,200. Guide only; the survey confirms a fixed price.

What the price covers

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Witney: the local details

Witney at a glance. Smaller towns such as Witney are surveyed alongside nearby jobs in Oxfordshire.

Postcodes
OX28, OX29
Area
Oxfordshire
Nearest towns
Carterton (5 miles), Oxford (10 miles), Abingdon (12 miles), Didcot (16 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Carterton, Oxford, Abingdon, Didcot, Bicester.

How it is built

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Rules that apply in Witney

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Witney: common questions

How quickly can work start in Witney?

Often 1–2 days. We book Witney surveys alongside other jobs in Oxfordshire, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Witney?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Witney?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Witney?

We cover Witney including OX28, OX29, and nearby Carterton, Oxford, Abingdon.

Also in Witney

Ready for a price in Witney? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac paths and footpaths in Witney: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price