Red tarmac driveways in Witney

Red tarmac driveway prices in Witney

Guide prices below are for Witney, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

Item	Guide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base	£82–£127 per m²
Example: 30 m² drive	£2,700–£4,150
Example: 50 m² drive	£4,100–£6,350
Example: 80 m² drive	£6,600–£10,100

As a 2026 guide in Witney, red tarmac driveway work runs at about £82–£127 per m² including VAT, so a 80 m² drive is roughly £6,600–£10,100. Guide only; the survey confirms a fixed price.

What we do on a red tarmac driveway

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

Full dig-out and MOT Type 1 sub-base, about 150 mm
Black AC 20 binder course, about 50–60 mm
Red pigmented surface course, about 20–30 mm
Contrasting block or kerb border as edge restraint
Falls and drainage set as for any new drive

How it is built

Covering Witney

The key facts for Witney. We cover Witney by grouping surveys with nearby Oxfordshire jobs; Oxford is 10 miles away.

Postcodes: OX28, OX29
Area: Oxfordshire
Nearest towns: Carterton (5 miles), Oxford (10 miles), Abingdon (12 miles), Didcot (16 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Carterton, Oxford, Abingdon, Didcot, Bicester.

Do I need permission in Witney?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Questions about red tarmac driveways in Witney

Is the survey in Witney free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Witney?

We cover Witney including OX28, OX29, and nearby Carterton, Oxford, Abingdon.

What approvals apply in Witney?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a red tarmac driveway take in Witney?

Usually 2–4 working days. We book Witney surveys alongside other jobs in Oxfordshire, and give you dates once the specification is agreed.

More we do in Witney

Tell us what you have in mind for Witney and we'll book a survey and put the specification in writing.