Driveways and paths · West Yorkshire

New tarmac driveways in Morley

Homeowners in Morley ask us about new tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

MORLEY GUIDE£58–£91 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Morley?

These Morley guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£91 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,900–£4,550
Example: 80 m² drive£4,600–£7,300

As a 2026 guide in Morley, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Guide only; the survey confirms a fixed price.

Morley: the local details

Morley at a glance. We reach Morley on our West Yorkshire survey days; Leeds is 4 miles away.

Postcodes
LS27
Area
West Yorkshire
Nearest towns
Batley (3 miles), Dewsbury (4 miles), Heckmondwike (4 miles), Ossett (4 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Close to Morley: Batley, Dewsbury, Heckmondwike, Ossett, Leeds.

Rules that apply in Morley

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Morley

What approvals apply in Morley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a new tarmac driveway in Morley?

As a 2026 guide in Morley, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Edging, drainage and a dropped kerb are priced separately where needed.

How quickly can work start in Morley?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Morley surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.

Will someone visit before I get a fixed price in Morley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Morley

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Morley.

Free survey for new surfacing

New tarmac driveways in Morley: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price