New tarmac driveways in Batley

New tarmac driveway prices in Batley

Guide prices below are for Batley, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£91 per m²
Example: 30 m² drive	£1,900–£3,000
Example: 50 m² drive	£2,900–£4,550
Example: 80 m² drive	£4,600–£7,300

As a 2026 guide in Batley, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Guide only; the survey confirms a fixed price.

How it is built

Where we work in and around Batley

Batley at a glance. Batley sits 7 miles from Leeds, within our regular West Yorkshire cover.

Postcodes: WF17
Area: West Yorkshire
Nearest towns: Dewsbury (1 mile), Heckmondwike (2 miles), Liversedge (2 miles), Ossett (3 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Dewsbury, Heckmondwike, Liversedge, Ossett, Morley.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Break out and remove the old surface and spoil
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Planning and kerb rules for Batley

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about new tarmac driveways in Batley

Do you cover all of Batley?

We cover Batley including WF17, and nearby Dewsbury, Heckmondwike, Liversedge.

Do I need permission for a new tarmac driveway in Batley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

New tarmac driveway cost in Batley: what should I budget?

As a 2026 guide in Batley, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Batley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Batley

Ready for a price in Batley? Use the guide price tool or send the form, and we'll arrange a visit.