New tarmac driveways in Elland
New tarmac driveways in Elland start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

How much should I budget in Elland?
These Elland guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £58–£91 per m² |
| Example: 30 m² drive | £1,900–£3,000 |
| Example: 50 m² drive | £2,900–£4,550 |
| Example: 80 m² drive | £4,600–£7,300 |
As a 2026 guide in Elland, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 80 m² drive is roughly £4,600–£7,300. Guide only; the survey confirms a fixed price.
What the price covers
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Dig to formation level, usually around 230–250 mm below finished height
- Geotextile membrane where the ground is soft or clay
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
- Falls set so water runs to a channel, gully or soft landscaping
Covering Elland
Survey cover and pricing for Elland. Elland is covered on our West Yorkshire rounds, 14 miles from Leeds.
- Postcodes
- HX5, HX4
- Area
- West Yorkshire
- Nearest towns
- Halifax (2 miles), Brighouse (3 miles), Huddersfield (3 miles), Cleckheaton (6 miles)
- Pricing
- Yorkshire and the Humber, about 4% below our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Halifax, Brighouse, Huddersfield, Cleckheaton, Mirfield.
Do I need permission in Elland?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Your questions answered
Can I get a free survey in Elland?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What approvals apply in Elland?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Which Elland postcodes do you cover?
We cover Elland including HX5, HX4, and nearby Halifax, Brighouse, Huddersfield.
How long does a new tarmac driveway take in Elland?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Elland surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.
Other work in Elland
- Tarmac driveway resurfacing
- Tar and chip driveways
- Front garden to tarmac driveway
- Car park and yard repairs
- Tarmac driveway repairs
- Tarmac paths and footpaths
- Everything in Elland
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Elland.
New tarmac driveways in Elland: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED