Driveways and paths · West Yorkshire

Tarmac paths and footpaths in Elland

A good tarmac path in Elland looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

ELLAND GUIDE£53–£86 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much should I budget in Elland?

Guide prices below are for Elland, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£86 per m²
Example: 10 m² path£630–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,100–£3,450

As a 2026 guide in Elland, tarmac path work runs at about £53–£86 per m² including VAT, so a 10 m² path is roughly £630–£1,050. Guide only; the survey confirms a fixed price.

Elland: the local details

Elland at a glance. We cover Elland by grouping surveys with nearby West Yorkshire jobs; Leeds is 14 miles away.

Postcodes
HX5, HX4
Area
West Yorkshire
Nearest towns
Halifax (2 miles), Brighouse (3 miles), Huddersfield (3 miles), Cleckheaton (6 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Halifax, Brighouse, Huddersfield, Cleckheaton, Mirfield.

Planning and kerb rules for Elland

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Gentle cross-fall so water runs off to the border

Questions about tarmac paths in Elland

Do I need permission for a tarmac path in Elland?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Elland?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Elland?

We cover Elland including HX5, HX4, and nearby Halifax, Brighouse, Huddersfield.

How long will the work take at my Elland property?

Often 1–2 days. We book Elland surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.

More we do in Elland

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Elland.

Free survey for new surfacing

Tarmac paths and footpaths in Elland: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price