Driveways and paths · West Yorkshire

Tarmac paths and footpaths in Brighouse

For tarmac paths in Brighouse, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

BRIGHOUSE GUIDE£53–£86 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Brighouse

Local guide rates for Brighouse (Yorkshire and the Humber, about 4% below our UK midpoint):

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£86 per m²
Example: 10 m² path£630–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,100–£3,450

As a 2026 guide in Brighouse, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

What is included in a tarmac path?

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Gentle cross-fall so water runs off to the border

Covering Brighouse

What applies in Brighouse. Brighouse is 12 miles from Leeds, and we survey there as part of West Yorkshire cover.

Postcodes
HD6
Area
West Yorkshire
Nearest towns
Elland (3 miles), Halifax (3 miles), Cleckheaton (3 miles), Liversedge (4 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Elland, Halifax, Cleckheaton, Liversedge, Huddersfield.

Planning and kerb rules for Brighouse

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Your questions answered

Are there planning or highway rules in Brighouse?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you cover all of Brighouse?

We cover Brighouse including HD6, and nearby Elland, Halifax, Cleckheaton.

Can I get a free survey in Brighouse?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Tarmac path cost in Brighouse: what should I budget?

As a 2026 guide in Brighouse, tarmac path work runs at about £53–£86 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Brighouse

Tell us what you have in mind for Brighouse and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Brighouse: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price