Driveways and paths · West Yorkshire

New tarmac driveways in Cleckheaton

New tarmac driveways in Cleckheaton start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

CLECKHEATON GUIDE£58–£91 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Cleckheaton?

Local guide rates for Cleckheaton (Yorkshire and the Humber, about 4% below our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£91 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,900–£4,550
Example: 80 m² drive£4,600–£7,300

As a 2026 guide in Cleckheaton, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Cleckheaton

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Cleckheaton: the local details

Cleckheaton at a glance. Cleckheaton is covered on our West Yorkshire rounds, 8 miles from Leeds.

Postcodes
BD19, BD12, BD11
Area
West Yorkshire
Nearest towns
Liversedge (2 miles), Heckmondwike (2 miles), Brighouse (3 miles), Batley (4 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Liversedge, Heckmondwike, Brighouse, Batley, Mirfield.

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Cleckheaton: common questions

Can I get a free survey in Cleckheaton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a new tarmac driveway in Cleckheaton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How quickly can work start in Cleckheaton?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Cleckheaton surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.

How much does a new tarmac driveway cost in Cleckheaton?

As a 2026 guide in Cleckheaton, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 30 m² drive is roughly £1,900–£3,000. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Cleckheaton

Questions about new tarmac driveways in Cleckheaton? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Cleckheaton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price