New tarmac driveways in Whitley Bay

How much should I budget in Whitley Bay?

These Whitley Bay guide prices reflect rates in the North East, about 7% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£56–£88 per m²
Example: 30 m² drive	£1,850–£2,900
Example: 50 m² drive	£2,800–£4,400
Example: 80 m² drive	£4,450–£7,050

As a 2026 guide in Whitley Bay, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 50 m² drive is roughly £2,800–£4,400. Guide only; the survey confirms a fixed price.

Layer by layer

Covering Whitley Bay

What applies in Whitley Bay. We reach Whitley Bay on our Tyne and Wear survey days; Newcastle upon Tyne is 8 miles away.

Postcodes: NE26, NE25, NE27
Area: Tyne and Wear
Nearest towns: North Shields (2 miles), Tynemouth (2 miles), South Shields (3 miles), Jarrow (4 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in North Shields, Tynemouth, South Shields, Jarrow, Wallsend.

Rules that apply in Whitley Bay

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Your questions answered

Will someone visit before I get a fixed price in Whitley Bay?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Whitley Bay?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Whitley Bay surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.

Do you work in my part of Whitley Bay?

We cover Whitley Bay including NE26, NE25, NE27, and nearby North Shields, Tynemouth, South Shields.

New tarmac driveway cost in Whitley Bay: what should I budget?

As a 2026 guide in Whitley Bay, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 50 m² drive is roughly £2,800–£4,400. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Whitley Bay

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Whitley Bay.