New tarmac driveways in North Shields

What does a new tarmac driveway cost in North Shields?

Guide prices below are for North Shields, adjusted for the North East, where surfacing rates run about 7% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£56–£88 per m²
Example: 30 m² drive	£1,850–£2,900
Example: 50 m² drive	£2,800–£4,400
Example: 80 m² drive	£4,450–£7,050

As a 2026 guide in North Shields, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 80 m² drive is roughly £4,450–£7,050. Guide only; the survey confirms a fixed price.

Do I need permission in North Shields?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Where we work in and around North Shields

Survey cover and pricing for North Shields. We reach North Shields on our Tyne and Wear survey days; Newcastle upon Tyne is 7 miles away.

Postcodes: NE30, NE29
Area: Tyne and Wear
Nearest towns: Tynemouth (1 mile), South Shields (1 mile), Whitley Bay (2 miles), Jarrow (3 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

Close to North Shields: Tynemouth, South Shields, Whitley Bay, Jarrow, Wallsend.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

How it is built

Questions about new tarmac driveways in North Shields

What approvals apply in North Shields?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How quickly can work start in North Shields?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book North Shields surveys alongside other jobs in Tyne and Wear, and give you dates once the specification is agreed.

Is the survey in North Shields free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in North Shields?

As a 2026 guide in North Shields, new tarmac driveway work runs at about £56–£88 per m² including VAT, so a 80 m² drive is roughly £4,450–£7,050. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in North Shields

Tell us what you have in mind for North Shields and we'll book a survey and put the specification in writing.