New tarmac driveways in Skelmersdale

New tarmac driveway prices in Skelmersdale

These Skelmersdale guide prices reflect rates in the North West, about 3% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£58–£92 per m²
Example: 30 m² drive	£1,900–£3,050
Example: 50 m² drive	£2,900–£4,600
Example: 80 m² drive	£4,650–£7,350

As a 2026 guide in Skelmersdale, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Guide only; the survey confirms a fixed price.

Covering Skelmersdale

What applies in Skelmersdale. We reach Skelmersdale on our Lancashire survey days; Preston is 15 miles away.

Postcodes: WN8
Area: Lancashire
Nearest towns: Ormskirk (5 miles), Wigan (6 miles), Kirkby (7 miles), Ashton-in-Makerfield (7 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Close to Skelmersdale: Ormskirk, Wigan, Kirkby, Ashton-in-Makerfield, Haydock.

Do I need permission in Skelmersdale?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Questions about new tarmac driveways in Skelmersdale

Will someone visit before I get a fixed price in Skelmersdale?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Skelmersdale postcodes do you cover?

We cover Skelmersdale including WN8, and nearby Ormskirk, Wigan, Kirkby.

Are there planning or highway rules in Skelmersdale?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a new tarmac driveway in Skelmersdale?

As a 2026 guide in Skelmersdale, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Skelmersdale

Tell us what you have in mind for Skelmersdale and we'll book a survey and put the specification in writing.