Driveways and paths · Greater Manchester

New tarmac driveways in Ashton-in-Makerfield

A good new tarmac driveway in Ashton-in-Makerfield looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

ASHTON-IN-MAKERFIELD GUIDE£58–£92 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Ashton-in-Makerfield?

For Ashton-in-Makerfield, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£92 per m²
Example: 30 m² drive£1,900–£3,050
Example: 50 m² drive£2,900–£4,600
Example: 80 m² drive£4,650–£7,350

As a 2026 guide in Ashton-in-Makerfield, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Guide only; the survey confirms a fixed price.

Covering Ashton-in-Makerfield

What applies in Ashton-in-Makerfield. Ashton-in-Makerfield is covered on our Greater Manchester rounds, 17 miles from Manchester.

Postcodes
WN4
Area
Greater Manchester
Nearest towns
Haydock (2 miles), Golborne (2 miles), Newton-le-Willows (3 miles), St Helens (4 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Haydock, Golborne, Newton-le-Willows, St Helens, Wigan.

Planning and kerb rules for Ashton-in-Makerfield

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Ashton-in-Makerfield: common questions

New tarmac driveway cost in Ashton-in-Makerfield: what should I budget?

As a 2026 guide in Ashton-in-Makerfield, new tarmac driveway work runs at about £58–£92 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,600. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Ashton-in-Makerfield property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ashton-in-Makerfield surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Do you work in my part of Ashton-in-Makerfield?

We cover Ashton-in-Makerfield including WN4, and nearby Haydock, Golborne, Newton-le-Willows.

Is the survey in Ashton-in-Makerfield free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Ashton-in-Makerfield

Questions about new tarmac driveways in Ashton-in-Makerfield? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Ashton-in-Makerfield: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price