Tarmac paths and footpaths in Skelmersdale

What does a tarmac path cost in Skelmersdale?

Guide prices below are for Skelmersdale, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£53–£87 per m²
Example: 10 m² path	£640–£1,050
Example: 20 m² path	£1,150–£1,900
Example: 40 m² path	£2,150–£3,500

As a 2026 guide in Skelmersdale, tarmac path work runs at about £53–£87 per m² including VAT, so a 40 m² path is roughly £2,150–£3,500. Guide only; the survey confirms a fixed price.

Skelmersdale: the local details

Survey cover and pricing for Skelmersdale. Skelmersdale sits 15 miles from Preston, within our regular Lancashire cover.

Postcodes: WN8
Area: Lancashire
Nearest towns: Ormskirk (5 miles), Wigan (6 miles), Kirkby (7 miles), Ashton-in-Makerfield (7 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

Close to Skelmersdale: Ormskirk, Wigan, Kirkby, Ashton-in-Makerfield, Haydock.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Path set out to the line and width you want
Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Timber, kerb or block edging on both sides
Gentle cross-fall so water runs off to the border

Rules that apply in Skelmersdale

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Skelmersdale: common questions

How much does a tarmac path cost in Skelmersdale?

As a 2026 guide in Skelmersdale, tarmac path work runs at about £53–£87 per m² including VAT, so a 40 m² path is roughly £2,150–£3,500. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Skelmersdale?

We cover Skelmersdale including WN8, and nearby Ormskirk, Wigan, Kirkby.

What approvals apply in Skelmersdale?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Skelmersdale?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Skelmersdale

Tell us what you have in mind for Skelmersdale and we'll book a survey and put the specification in writing.