New tarmac driveways in Dartford

What does a new tarmac driveway cost in Dartford?

Guide prices below are for Dartford, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£66–£105 per m²
Example: 30 m² drive	£2,200–£3,450
Example: 50 m² drive	£3,300–£5,250
Example: 80 m² drive	£5,300–£8,350

As a 2026 guide in Dartford, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Dartford

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Falls set so water runs to a channel, gully or soft landscaping

Covering Dartford

What applies in Dartford. Dartford is 18 miles from Maidstone, and we survey there as part of Kent cover.

Postcodes: DA1, DA2, DA8
Area: Kent
Nearest towns: Bexley (3 miles), Swanley (4 miles), Swanscombe (4 miles), Welling (5 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Bexley, Swanley, Swanscombe, Welling, South Ockendon.

How it is built

Questions about new tarmac driveways in Dartford

Can I get a free survey in Dartford?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Dartford?

As a 2026 guide in Dartford, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Dartford?

We cover Dartford including DA1, DA2, DA8, and nearby Bexley, Swanley, Swanscombe.

How quickly can work start in Dartford?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Dartford surveys alongside other jobs in Kent, and give you dates once the specification is agreed.

Other work in Dartford

Questions about new tarmac driveways in Dartford? Call, WhatsApp or use the form, and we'll talk it through.