New tarmac driveways in Swanscombe

New tarmac driveway prices in Swanscombe

These Swanscombe guide prices reflect rates in the South East, about 10% above our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£66–£105 per m²
Example: 30 m² drive	£2,200–£3,450
Example: 50 m² drive	£3,300–£5,250
Example: 80 m² drive	£5,300–£8,350

As a 2026 guide in Swanscombe, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Guide only; the survey confirms a fixed price.

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Do I need permission in Swanscombe?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Swanscombe

The key facts for Swanscombe. Smaller towns such as Swanscombe are surveyed alongside nearby jobs in Kent.

Postcodes: DA10, DA9, DA3
Area: Kent
Nearest towns: Grays (2 miles), Gravesend (3 miles), Dartford (4 miles), South Ockendon (4 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Grays, Gravesend, Dartford, South Ockendon, Swanley.

Questions about new tarmac driveways in Swanscombe

What approvals apply in Swanscombe?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a new tarmac driveway cost in Swanscombe?

As a 2026 guide in Swanscombe, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Edging, drainage and a dropped kerb are priced separately where needed.

How quickly can work start in Swanscombe?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Swanscombe surveys alongside other jobs in Kent, and give you dates once the specification is agreed.

Can I get a free survey in Swanscombe?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Swanscombe

Questions about new tarmac driveways in Swanscombe? Call, WhatsApp or use the form, and we'll talk it through.