Driveways and paths · Greater London

New tarmac driveways in Bexley

We survey and price new tarmac driveways across Bexley and the DA5, DA6, DA7 postcodes, with every layer and its depth written into the quote.

BEXLEY GUIDE£72–£114 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Bexley?

Guide prices below are for Bexley, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£72–£114 per m²
Example: 30 m² drive£2,400–£3,750
Example: 50 m² drive£3,600–£5,700
Example: 80 m² drive£5,750–£9,100

As a 2026 guide in Bexley, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Guide only; the survey confirms a fixed price.

Do I need permission in Bexley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

How it is built

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Covering Bexley

What applies in Bexley. We cover Bexley as part of our regular Greater London rounds.

Postcodes
DA5, DA6, DA7, DA14
Area
Greater London
Nearest towns
Welling (2 miles), Dartford (3 miles), Swanley (3 miles), Eltham (4 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

Close to Bexley: Welling, Dartford, Swanley, Eltham, Thamesmead.

Bexley: common questions

How much does a new tarmac driveway cost in Bexley?

As a 2026 guide in Bexley, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Edging, drainage and a dropped kerb are priced separately where needed.

Do I need permission for a new tarmac driveway in Bexley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Bexley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Bexley?

We cover Bexley including DA5, DA6, DA7, DA14, and nearby Welling, Dartford, Swanley.

Also in Bexley

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Bexley.

Free survey for new surfacing

New tarmac driveways in Bexley: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price