New tarmac driveways in Berkhamsted

New tarmac driveway prices in Berkhamsted

For Berkhamsted, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£63–£100 per m²
Example: 30 m² drive	£2,100–£3,300
Example: 50 m² drive	£3,150–£5,000
Example: 80 m² drive	£5,050–£8,000

As a 2026 guide in Berkhamsted, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 50 m² drive is roughly £3,150–£5,000. Guide only; the survey confirms a fixed price.

Berkhamsted: the local details

Berkhamsted at a glance. We cover Berkhamsted by grouping surveys with nearby Hertfordshire jobs; Watford is 10 miles away.

Postcodes: HP4, HP23
Area: Hertfordshire
Nearest towns: Chesham (4 miles), Hemel Hempstead (5 miles), Amersham (7 miles), Dunstable (9 miles)
Pricing: East of England, about 5% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Chesham, Hemel Hempstead, Amersham, Dunstable, Rickmansworth.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Dig to formation level, usually around 230–250 mm below finished height
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Do I need permission in Berkhamsted?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Berkhamsted: common questions

How much does a new tarmac driveway cost in Berkhamsted?

As a 2026 guide in Berkhamsted, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 50 m² drive is roughly £3,150–£5,000. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Berkhamsted free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Berkhamsted?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long will the work take at my Berkhamsted property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Berkhamsted surveys alongside other jobs in Hertfordshire, and give you dates once the specification is agreed.

Also in Berkhamsted

Ready for a price in Berkhamsted? Use the guide price tool or send the form, and we'll arrange a visit.