Driveways and paths · Hertfordshire

Tarmac paths and footpaths in Berkhamsted

Homeowners in Berkhamsted ask us about tarmac paths for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

BERKHAMSTED GUIDE£58–£94 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

How much should I budget in Berkhamsted?

For Berkhamsted, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£58–£94 per m²
Example: 10 m² path£690–£1,150
Example: 20 m² path£1,250–£2,100
Example: 40 m² path£2,300–£3,800

As a 2026 guide in Berkhamsted, tarmac path work runs at about £58–£94 per m² including VAT, so a 20 m² path is roughly £1,250–£2,100. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Berkhamsted

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Where we work in and around Berkhamsted

Survey cover and pricing for Berkhamsted. Berkhamsted is covered on our Hertfordshire rounds, 10 miles from Watford.

Postcodes
HP4, HP23
Area
Hertfordshire
Nearest towns
Chesham (4 miles), Hemel Hempstead (5 miles), Amersham (7 miles), Dunstable (9 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Chesham, Hemel Hempstead, Amersham, Dunstable, Rickmansworth.

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a tarmac path

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled

Your questions answered

How much does a tarmac path cost in Berkhamsted?

As a 2026 guide in Berkhamsted, tarmac path work runs at about £58–£94 per m² including VAT, so a 20 m² path is roughly £1,250–£2,100. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Berkhamsted?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you cover all of Berkhamsted?

We cover Berkhamsted including HP4, HP23, and nearby Chesham, Hemel Hempstead, Amersham.

Will someone visit before I get a fixed price in Berkhamsted?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Berkhamsted

Tell us what you have in mind for Berkhamsted and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Berkhamsted: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price