New tarmac driveways in Amersham

How much should I budget in Amersham?

Local guide rates for Amersham (the South East, about 10% above our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£66–£105 per m²
Example: 30 m² drive	£2,200–£3,450
Example: 50 m² drive	£3,300–£5,250
Example: 80 m² drive	£5,300–£8,350

As a 2026 guide in Amersham, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Guide only; the survey confirms a fixed price.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Where we work in and around Amersham

The key facts for Amersham. We cover Amersham by grouping surveys with nearby Buckinghamshire jobs; Milton Keynes is 27 miles away.

Postcodes: HP7, HP6, HP16
Area: Buckinghamshire
Nearest towns: Chesham (2 miles), Chalfont St Peter (5 miles), Gerrards Cross (6 miles), High Wycombe (6 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Chesham, Chalfont St Peter, Gerrards Cross, High Wycombe, Rickmansworth.

Rules that apply in Amersham

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Layer by layer

Questions about new tarmac driveways in Amersham

Will someone visit before I get a fixed price in Amersham?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Amersham?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a new tarmac driveway take in Amersham?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Amersham surveys alongside other jobs in Buckinghamshire, and give you dates once the specification is agreed.

How much does a new tarmac driveway cost in Amersham?

As a 2026 guide in Amersham, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Amersham

Ready for a price in Amersham? Use the guide price tool or send the form, and we'll arrange a visit.