New tarmac driveways in High Wycombe

What does a new tarmac driveway cost in High Wycombe?

Local guide rates for High Wycombe (the South East, about 10% above our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£66–£105 per m²
Example: 30 m² drive	£2,200–£3,450
Example: 50 m² drive	£3,300–£5,250
Example: 80 m² drive	£5,300–£8,350

As a 2026 guide in High Wycombe, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Guide only; the survey confirms a fixed price.

Do I need permission in High Wycombe?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

The build-up we price

Where we work in and around High Wycombe

High Wycombe at a glance. We cover High Wycombe as part of our regular Buckinghamshire rounds.

Postcodes: HP11, HP13, HP12, HP15, HP10, HP14
Area: Buckinghamshire
Nearest towns: Marlow (4 miles), Amersham (6 miles), Maidenhead (7 miles), Chesham (8 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Marlow, Amersham, Maidenhead, Chesham, Chalfont St Peter.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Questions about new tarmac driveways in High Wycombe

What is the price of a new tarmac driveway in High Wycombe?

As a 2026 guide in High Wycombe, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 30 m² drive is roughly £2,200–£3,450. Edging, drainage and a dropped kerb are priced separately where needed.

How quickly can work start in High Wycombe?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book High Wycombe surveys alongside other jobs in Buckinghamshire, and give you dates once the specification is agreed.

Are there planning or highway rules in High Wycombe?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in High Wycombe free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in High Wycombe

Questions about new tarmac driveways in High Wycombe? Call, WhatsApp or use the form, and we'll talk it through.