Driveways and paths · Greater London

New tarmac driveways in Dagenham

Homeowners in Dagenham ask us about new tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

DAGENHAM GUIDE£72–£114 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Dagenham?

Local guide rates for Dagenham (London, about 20% above our UK midpoint):

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£72–£114 per m²
Example: 30 m² drive£2,400–£3,750
Example: 50 m² drive£3,600–£5,700
Example: 80 m² drive£5,750–£9,100

As a 2026 guide in Dagenham, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Dagenham

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Dagenham

Survey cover and pricing for Dagenham. We cover Dagenham as part of our regular Greater London rounds.

Postcodes
RM10, RM9, RM8, RM13, RM6
Area
Greater London
Nearest towns
Romford (2 miles), Hornchurch (2 miles), Barking (4 miles), Thamesmead (4 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Romford, Hornchurch, Barking, Thamesmead, Ilford.

Your questions answered

Is the survey in Dagenham free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a new tarmac driveway take in Dagenham?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Dagenham surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Which Dagenham postcodes do you cover?

We cover Dagenham including RM10, RM9, RM8, RM13, RM6, and nearby Romford, Hornchurch, Barking.

What is the price of a new tarmac driveway in Dagenham?

As a 2026 guide in Dagenham, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Dagenham

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Dagenham.

Free survey for new surfacing

New tarmac driveways in Dagenham: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price