Tar and chip driveways in Dagenham

How much should I budget in Dagenham?

For Dagenham, we apply the London rate, about 20% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£54–£90 per m²
Example: 50 m² drive	£2,700–£4,500
Example: 100 m² drive	£5,400–£9,000
Example: 200 m² drive	£10,250–£17,100

As a 2026 guide in Dagenham, tar and chip driveway work runs at about £54–£90 per m² including VAT, so a 100 m² drive is roughly £5,400–£9,000. Guide only; the survey confirms a fixed price.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Loose surplus chippings swept up after a few days

Do I need permission in Dagenham?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Dagenham: the local details

The key facts for Dagenham. As one of the larger towns in Greater London, Dagenham sees regular survey visits.

Postcodes: RM10, RM9, RM8, RM13, RM6
Area: Greater London
Nearest towns: Romford (2 miles), Hornchurch (2 miles), Barking (4 miles), Thamesmead (4 miles)
Pricing: London, about 20% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Romford, Hornchurch, Barking, Thamesmead, Ilford.

Dagenham: common questions

How much does a tar and chip driveway cost in Dagenham?

As a 2026 guide in Dagenham, tar and chip driveway work runs at about £54–£90 per m² including VAT, so a 100 m² drive is roughly £5,400–£9,000. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a tar and chip driveway take in Dagenham?

Often 1–3 days depending on base work. We book Dagenham surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Is the survey in Dagenham free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Dagenham?

We cover Dagenham including RM10, RM9, RM8, RM13, RM6, and nearby Romford, Hornchurch, Barking.

Other work in Dagenham

Questions about tar and chip driveways in Dagenham? Call, WhatsApp or use the form, and we'll talk it through.