Driveways and paths · Surrey

Tarmac paths and footpaths in Banstead

For tarmac paths in Banstead, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

BANSTEAD GUIDE£61–£99 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Banstead?

These Banstead guide prices reflect rates in the South East, about 10% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£61–£99 per m²
Example: 10 m² path£730–£1,200
Example: 20 m² path£1,350–£2,200
Example: 40 m² path£2,400–£3,950

As a 2026 guide in Banstead, tarmac path work runs at about £61–£99 per m² including VAT, so a 10 m² path is roughly £730–£1,200. Guide only; the survey confirms a fixed price.

The build-up we price

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Where we work in and around Banstead

The key facts for Banstead. Banstead is 15 miles from Woking, and we survey there as part of Surrey cover.

Postcodes
SM7, KT20
Area
Surrey
Nearest towns
Sutton (2 miles), Ewell (3 miles), Epsom (3 miles), Coulsdon (3 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

Close to Banstead: Sutton, Ewell, Epsom, Coulsdon, Carshalton.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Planning and kerb rules for Banstead

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Your questions answered

Tarmac path cost in Banstead: what should I budget?

As a 2026 guide in Banstead, tarmac path work runs at about £61–£99 per m² including VAT, so a 10 m² path is roughly £730–£1,200. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Banstead property?

Often 1–2 days. We book Banstead surveys alongside other jobs in Surrey, and give you dates once the specification is agreed.

Do you cover all of Banstead?

We cover Banstead including SM7, KT20, and nearby Sutton, Ewell, Epsom.

Will someone visit before I get a fixed price in Banstead?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Banstead

Tell us what you have in mind for Banstead and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tarmac paths and footpaths in Banstead: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price