Tarmac paths and footpaths in Perth
For tarmac paths in Perth, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

Tarmac path prices in Perth
These Perth guide prices reflect rates in Scotland, about 2% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac garden path or footpath, hand-laid | £54–£88 per m² |
| Example: 10 m² path | £650–£1,050 |
| Example: 20 m² path | £1,200–£1,950 |
| Example: 40 m² path | £2,150–£3,550 |
As a 2026 guide in Perth, tarmac path work runs at about £54–£88 per m² including VAT, so a 10 m² path is roughly £650–£1,050. Guide only; the survey confirms a fixed price.
What is included in a tarmac path?
Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.
- Path set out to the line and width you want
- Excavation to about 150–180 mm with spoil removed
- MOT Type 1 base, about 100 mm, compacted
- Binder and surface course laid hot by hand and rolled
- Gentle cross-fall so water runs off to the border
Planning and kerb rules for Perth
Repairs, paths and edging work rarely need planning permission. In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size.
Covering Perth
The key facts for Perth. Perth is under a mile from Perth, and we survey there as part of Perth and Kinross cover.
- Postcodes
- PH2, PH1
- Area
- Perth and Kinross
- Nearest towns
- Scone (2 miles), Auchterarder (13 miles), Blairgowrie (14 miles), Crieff (16 miles)
- Pricing
- Scotland, about 2% below our UK midpoint
- Kerb approvals
- The council
The same service is available in Scone, Auchterarder, Blairgowrie, Crieff.
Your questions answered
Are there planning or highway rules in Perth?
In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.
Tarmac path cost in Perth: what should I budget?
As a 2026 guide in Perth, tarmac path work runs at about £54–£88 per m² including VAT, so a 10 m² path is roughly £650–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.
Which Perth postcodes do you cover?
We cover Perth including PH2, PH1, and nearby Scone, Auchterarder, Blairgowrie.
Can I get a free survey in Perth?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Also in Perth
- Car park and yard repairs
- Tar and chip driveways
- Tarmac driveway resurfacing
- New tarmac driveways
- Car park resurfacing
- Permeable tarmac driveways
- Everything in Perth
Questions about tarmac paths in Perth? Call, WhatsApp or use the form, and we'll talk it through.
Tarmac paths and footpaths in Perth: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED