Permeable tarmac driveways in Perth

How much should I budget in Perth?

These Perth guide prices reflect rates in Scotland, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
Porous asphalt drive on a permeable stone base	£78–£122 per m²
Example: 30 m² drive	£2,600–£4,050
Example: 50 m² drive	£3,900–£6,100
Example: 80 m² drive	£6,250–£9,800

As a 2026 guide in Perth, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,100. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Perth

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

How it is built

What is included in a permeable tarmac driveway?

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

Dig out deeper than a standard drive to fit the storage layer
Geotextile separating layer on the formation
Open-graded permeable sub-base, often Type 3 or 4/20 stone
Overflow to a soakaway or border on slow-draining ground
Edge restraint that does not block the flow

Where we work in and around Perth

What applies in Perth. Perth sits under a mile from Perth, within our regular Perth and Kinross cover.

Postcodes: PH2, PH1
Area: Perth and Kinross
Nearest towns: Scone (2 miles), Auchterarder (13 miles), Blairgowrie (14 miles), Crieff (16 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

Nearby, we work in Scone, Auchterarder, Blairgowrie, Crieff.

Questions about permeable tarmac driveways in Perth

Do I need permission for a permeable tarmac driveway in Perth?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Do you cover all of Perth?

We cover Perth including PH2, PH1, and nearby Scone, Auchterarder, Blairgowrie.

How long does a permeable tarmac driveway take in Perth?

Usually 3–5 working days. We book Perth surveys alongside other jobs in Perth and Kinross, and give you dates once the specification is agreed.

Can I get a free survey in Perth?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Perth

Ready for a price in Perth? Use the guide price tool or send the form, and we'll arrange a visit.