Driveways and paths · Greater Manchester

Tarmac paths and footpaths in Longsight

For tarmac paths in Longsight, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

LONGSIGHT GUIDE£53–£87 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Longsight?

Guide prices below are for Longsight, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£87 per m²
Example: 10 m² path£640–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,150–£3,500

As a 2026 guide in Longsight, tarmac path work runs at about £53–£87 per m² including VAT, so a 10 m² path is roughly £640–£1,050. Guide only; the survey confirms a fixed price.

Where we work in and around Longsight

Survey cover and pricing for Longsight. Smaller towns such as Longsight are surveyed alongside nearby jobs in Greater Manchester.

Postcodes
M12, M13, M14, M18, M19, M20
Area
Greater Manchester
Nearest towns
Manchester (2 miles), Droylsden (3 miles), Denton (3 miles), Failsworth (4 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Close to Longsight: Manchester, Droylsden, Denton, Failsworth, Stockport.

What the price covers

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Do I need permission in Longsight?

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Longsight: common questions

Do you work in my part of Longsight?

We cover Longsight including M12, M13, M14, M18, M19, M20, and nearby Manchester, Droylsden, Denton.

How long will the work take at my Longsight property?

Often 1–2 days. We book Longsight surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Tarmac path cost in Longsight: what should I budget?

As a 2026 guide in Longsight, tarmac path work runs at about £53–£87 per m² including VAT, so a 10 m² path is roughly £640–£1,050. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Longsight?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Longsight

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Longsight.

Free survey for new surfacing

Tarmac paths and footpaths in Longsight: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price