Tarmac paths and footpaths in Barking

What does a tarmac path cost in Barking?

Guide prices below are for Barking, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

Item	Guide price (inc VAT)
Tarmac garden path or footpath, hand-laid	£66–£108 per m²
Example: 10 m² path	£790–£1,300
Example: 20 m² path	£1,450–£2,400
Example: 40 m² path	£2,650–£4,300

As a 2026 guide in Barking, tarmac path work runs at about £66–£108 per m² including VAT, so a 20 m² path is roughly £1,450–£2,400. Guide only; the survey confirms a fixed price.

Where we work in and around Barking

What applies in Barking. We cover Barking as part of our regular Greater London rounds.

Postcodes: IG11, E6
Area: Greater London
Nearest towns: Ilford (2 miles), Thamesmead (3 miles), Canning Town (3 miles), Stratford (4 miles)
Pricing: London, about 20% above our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Ilford, Thamesmead, Canning Town, Stratford, Dagenham.

Do I need permission in Barking?

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

What is included in a tarmac path?

A tarmac path is a lighter version of a drive build: a compacted stone base of around 100 mm, a binder course and a fine surface course, laid by hand and held in by timber edging, kerbs or blocks.

Path set out to the line and width you want
Excavation to about 150–180 mm with spoil removed
MOT Type 1 base, about 100 mm, compacted
Binder and surface course laid hot by hand and rolled
Gentle cross-fall so water runs off to the border

Barking: common questions

Do I need permission for a tarmac path in Barking?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a tarmac path in Barking?

As a 2026 guide in Barking, tarmac path work runs at about £66–£108 per m² including VAT, so a 20 m² path is roughly £1,450–£2,400. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Barking free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Barking?

We cover Barking including IG11, E6, and nearby Ilford, Thamesmead, Canning Town.

Other work in Barking

Questions about tarmac paths in Barking? Call, WhatsApp or use the form, and we'll talk it through.