Driveways and paths · Cumbria

Tarmac paths and footpaths in Kendal

A good tarmac path in Kendal looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

KENDAL GUIDE£53–£87 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

Tarmac path prices in Kendal

Guide prices below are for Kendal, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£53–£87 per m²
Example: 10 m² path£640–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,150–£3,500

As a 2026 guide in Kendal, tarmac path work runs at about £53–£87 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Guide only; the survey confirms a fixed price.

What is included in a tarmac path?

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Path set out to the line and width you want
  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Rules that apply in Kendal

Repairs, paths and edging work rarely need planning permission. In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property.

Covering Kendal

What applies in Kendal. Kendal is covered on our Cumbria rounds, 40 miles from Carlisle.

Postcodes
LA9, LA8
Area
Cumbria
Nearest towns
Penrith (23 miles), Barrow-in-Furness (24 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Penrith, Barrow-in-Furness.

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tarmac paths in Kendal

Tarmac path cost in Kendal: what should I budget?

As a 2026 guide in Kendal, tarmac path work runs at about £53–£87 per m² including VAT, so a 20 m² path is roughly £1,150–£1,900. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Kendal?

We cover Kendal including LA9, LA8, and nearby Penrith, Barrow-in-Furness.

Is the survey in Kendal free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tarmac path in Kendal?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Kendal

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Kendal.

Free survey for new surfacing

Tarmac paths and footpaths in Kendal: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price