Tarmac driveway resurfacing in Stratford-upon-Avon
A good tarmac resurfacing job in Stratford-upon-Avon looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

Tarmac resurfacing prices in Stratford-upon-Avon
For Stratford-upon-Avon, we apply the West Midlands rate, in line with our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac resurfacing over a sound existing base | £25–£45 per m² |
| Example: 30 m² drive | £830–£1,500 |
| Example: 50 m² drive | £1,250–£2,250 |
| Example: 80 m² drive | £2,000–£3,600 |
As a 2026 guide in Stratford-upon-Avon, tarmac resurfacing work runs at about £25–£45 per m² including VAT, so a 30 m² drive is roughly £830–£1,500. Guide only; the survey confirms a fixed price.
Rules that apply in Stratford-upon-Avon
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
Where we work in and around Stratford-upon-Avon
Stratford-upon-Avon at a glance. Stratford-upon-Avon is 25 miles from Nuneaton, and we survey there as part of Warwickshire cover.
- Postcodes
- CV37
- Area
- Warwickshire
- Nearest towns
- Warwick (8 miles), Leamington Spa (10 miles), Kenilworth (12 miles), Bedworth (22 miles)
- Pricing
- West Midlands, in line with our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Warwick, Leamington Spa, Kenilworth, Bedworth, Rugby.
The build-up we price
What we do on tarmac resurfacing
Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.
- Cut out and patch failed areas before overlaying
- Plane or cut back at thresholds, kerbs and covers so levels still work
- Weed treatment and a clean surface
- New surface course, typically 25–40 mm, laid hot and rolled
- Edges sealed and joints to existing surfaces cut neatly
Stratford-upon-Avon: common questions
Will someone visit before I get a fixed price in Stratford-upon-Avon?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What is the price of tarmac resurfacing in Stratford-upon-Avon?
As a 2026 guide in Stratford-upon-Avon, tarmac resurfacing work runs at about £25–£45 per m² including VAT, so a 30 m² drive is roughly £830–£1,500. Edging, drainage and a dropped kerb are priced separately where needed.
What approvals apply in Stratford-upon-Avon?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How long does tarmac resurfacing take in Stratford-upon-Avon?
Often 1–2 days for a typical drive. We book Stratford-upon-Avon surveys alongside other jobs in Warwickshire, and give you dates once the specification is agreed.
More we do in Stratford-upon-Avon
- Private and access road surfacing
- Car park and yard repairs
- Tar and chip driveways
- Tarmac paths and footpaths
- Red tarmac driveways
- Car park surfacing
- Everything in Stratford-upon-Avon
Questions about tarmac resurfacing jobs in Stratford-upon-Avon? Call, WhatsApp or use the form, and we'll talk it through.
Tarmac driveway resurfacing in Stratford-upon-Avon: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED